TipValve Blog

Welcome TipValve Blog, thank you for your participation.

« Design feature of the metal hard seal ball valveThe Overview of Long Pipeline Ball Valve »

Introduction of actuated Ball Valve

            Valves are needed to regulate the flow of some liquid or air. Actuated ball valve is one of the types which has a spherical disk in it and the disk has a hole in it. When the hole is aligned with the rest of the hose or pipe, or open, it allows the liquid or air to flow through. When the hole isn't lined up with the pipe, or closed, there is no flow.

The device can operate through many ways, manual which has to open or close by hand, but the actuated ball valve is the most common type, which adopts an actuator, an outside force that causes the valve to open and close. There are three common types of actuated ball valves, Electric, Pneumatic and Hydraulic actuator. A pneumatic valve is run by air, using air power to open or close the valve. An electric valve is run by an electric motor, depending on the motor to run to turn the disk to open or close the valve. And a hydraulic valve depends on a fluid to cause them to work.
 
Ball valves have several types according to different standard. You can get actuated ball valves that are stainless steel and have several open ports, which will let the valves control more than one pipe. You can find ball joints in many different sizes, so that you can choose one that will fit in with your products and their needs. Since there are so many choices in size, manufacture, actuators and materials for ball joints, it is easy to find the one that works the best for you, no matter what you need for it to do. Stainless steel is one of the best choices which won't rust and will last for a long time.
  • Articles related:

Post comment:

◎welcome to give out your point。

Calendar

Comments

Previous

Powered By TipValve Blog

Copyright TipValve Blog. Some Rights Reserved.