TipValve Blog

Welcome TipValve Blog, thank you for your participation.

« Various types of valve selection guide PART 2Three-piece ball valve »

The advantage of the Forged Steel Valves

Forged Steel Valves simple structure, small size, light weight;Close

 

.
Forged Steel Valves, valve sealing surface material widely used plastic, sealing, and has been widely used in the vacuum system;
Forged Steel Valves in the fully open or fully closed, the ball and seat sealing surface and the dielectric isolation, through the media, does not cause erosion of the sealing surface of the valve;
Forged Steel Valves wide range of application, the path from childhood to a few millimeters to a few meters, from high vacuum to high pressure can be applied..Forged Steel Valves
are easy to operate, opening and closing rapidly, from fully open to fully closed as long as the rotation 90, to facilitate remote control;Easy maintenance
Forged Steel Valves, Ball Valves simple structure, seals are generally active, the removal replacement is more convenient;

 

Forged Steel Valves for truncated or connected line media, use different materials, can be applicable to water, steam, oil products, nitric acid, acetic acid, oxidizing medium, urea and other media. Forged Steel Valves fully open position, in line with gate position (ie, travel> OK. Casting pig iron in the cupola melting cast iron (liquid), and cast into the liquid cast iron casting, this cast iron is called cast iron Valve closed, sealing surface can only rely on media pressure to seal the enrichment equipment that rely on media pressure on the sealing surface of the ram pressure to the other side of the seat to ensure that the advantages of the sealing surface of the seal Forged Steel Valves.

 

Forged Steel Valves fluid resistance is small. The drag coefficient is equal to the same length of pipe sections.
 

Post comment:

◎welcome to give out your point。

Calendar

Comments

Previous

Powered By TipValve Blog

Copyright TipValve Blog. Some Rights Reserved.